This was actually my first-ever activewear project (finished before the Jalie skort I blogged about earlier this week), but I didn't actually work out in them until this morning when I took them out for a run.
These are the capri length leggings from the Fehr Trade Duathlon Shorts pattern. I've paired them with an ill-fitting (but cheap) top I picked up at Macy's. (Note to self: need to work on making some activewear tops that actually fit!)
For my first attempt at activewear, I figured I couldn't go wrong with Fehr Trade as I have only read positive things about instructions and fit for all of her designs. Sure enough, the instructions were great! Very straightforward and clear throughout. The fit is pretty good as well. Based on my measurements (32" waist, 42" hips), I went with the Medium. They aren't super tight-- there is actually some looseness at the top of my thighs in back which is a little weird, but also fine... I guess I was expecting a bit more compression. Other than that, I feel like they are great all around.
The pink fabrics are from an activewear binge from Fabric Mart last December, both nylon/Lycra blends. The bit of black is some activewear jersey (92% Poly/8% Lycra) I picked up from Fabric.com.
I LOVE the rise in these and the elastic at the waist. Very comfortable and nothing moves.
My one wish is that the side pockets were a bit wider so that I could stash my phone in there if I wanted. And without any elastic or anything at the top edge to help secure it better, I'm not sure I'd trust to put much in the pockets.
As for how they felt-- very comfortable! There was no funky rubbing or anything. Everything stayed put. I'm excited to try them at my next HIIT workout-- I think they'll be great for that too. These are going to get a lot of wear!
Friday, July 15, 2016
Monday, July 11, 2016
Jalie Skort
It took a few months, but I am finally using some of the activewear fabric I picked up last December:
First up is Jalie 2796, the Multi-Sport Skort:
This is my first time using Jalie, and I am really impressed with the drafting and the instructions. The line drawings are particularly well done and offer very clear illustrations of the written steps. I wish though that the drawings and instructions were together... I was having to flip back and forth between the two. But now that I've made them once, I probably wouldn't even need the written instructions-- the drawings would be sufficient.
Based on my measurements, I cut a "W" for the waist and graded out to the "X" for the hips downward. I think the skort fits pretty well-- nothing felt overly tight or loose. I used my regular sewing machine and stitched all of the seams with a narrow zig-zag followed by serging them. I used my coverstitch for all the hems and the pocket.
I went for a run in my new skort yesterday (thus all the sweaty pics) and found them to be pretty darn comfy.
I love that they give the coolness of shorts and that the skirt covers all of the lumps and bumps (which are very evident in the pics of the shorts above). So awesome!!!
Bonus: my Galaxy S5 actually fits in the side pocket! I ran with my phone and it was great-- no bumping or jostling-- it totally stayed in place.
I used the full (wide) waistband and found that as I ran, it just ended up curling over on itself. I'm not sure if that is because I really need a bigger size, or if that is just what happens since there is no elastic helping to stabilize it. It wasn't uncomfortable and definitely still felt secure (i.e., my skort wasn't going to fall off or anything). But I am considering using the low waistband option next time.
The other thing was that after a few minutes of running, the shorts crawled up my legs. While it wasn't annoying enough for me to stop and tug them back down in front of random peeps on the road, it did feel weird. Near the end of my run (when I got to a quiet street with no people), I tugged them back down and after that, they actually stayed in place. So maybe my sweat helped somehow? Anyway-- I'm on the hunt for a solution. Melissa of Fehr Trade suggests in her Duathlon Shorts pattern instructions to try "silicone sock paint" to help the shorts stay in place, so I'm going to start with that and see how it goes.
First up is Jalie 2796, the Multi-Sport Skort:
This is my first time using Jalie, and I am really impressed with the drafting and the instructions. The line drawings are particularly well done and offer very clear illustrations of the written steps. I wish though that the drawings and instructions were together... I was having to flip back and forth between the two. But now that I've made them once, I probably wouldn't even need the written instructions-- the drawings would be sufficient.
Based on my measurements, I cut a "W" for the waist and graded out to the "X" for the hips downward. I think the skort fits pretty well-- nothing felt overly tight or loose. I used my regular sewing machine and stitched all of the seams with a narrow zig-zag followed by serging them. I used my coverstitch for all the hems and the pocket.
I went for a run in my new skort yesterday (thus all the sweaty pics) and found them to be pretty darn comfy.
I love that they give the coolness of shorts and that the skirt covers all of the lumps and bumps (which are very evident in the pics of the shorts above). So awesome!!!
Bonus: my Galaxy S5 actually fits in the side pocket! I ran with my phone and it was great-- no bumping or jostling-- it totally stayed in place.
I used the full (wide) waistband and found that as I ran, it just ended up curling over on itself. I'm not sure if that is because I really need a bigger size, or if that is just what happens since there is no elastic helping to stabilize it. It wasn't uncomfortable and definitely still felt secure (i.e., my skort wasn't going to fall off or anything). But I am considering using the low waistband option next time.
The other thing was that after a few minutes of running, the shorts crawled up my legs. While it wasn't annoying enough for me to stop and tug them back down in front of random peeps on the road, it did feel weird. Near the end of my run (when I got to a quiet street with no people), I tugged them back down and after that, they actually stayed in place. So maybe my sweat helped somehow? Anyway-- I'm on the hunt for a solution. Melissa of Fehr Trade suggests in her Duathlon Shorts pattern instructions to try "silicone sock paint" to help the shorts stay in place, so I'm going to start with that and see how it goes.
Tuesday, July 5, 2016
Remakes!
Now that school is out, I've managed to do a bit of sewing. Yay! I started with a few re-makes.
I started with another rendition of Kwik Sew 3513:
Here I've got the top tucked in so you can see the foldover waistband.
I loved this the first time I sewed it up, and my love remains constant. It is a simple, straightforward, and effective design! I again made a size Medium. My only change was to add 5" to the length in order to make it into more of a maxi-skirt. The fabric is a Maggy London ITY knit from Fabric Mart.
The aqua top that I'm wearing with the skirt is another remake of the Maria Denmark Kirsten Kimono Tee. This is the third one I've made (version one | version two). This time I used a poly/lycra jersey knit in a pretty Caribbean blue from Fabric Mart. This is the Large with a 1" dartless FBA (Maria Denmark offers a friendly tutorial for no-dark fronts). Such a fabulous design made even more so because Maria Denmark offers it as a FREE pattern when you sign up for her newsletter.
And here is another Kirsten Kimono Tee:
So the only remarkable thing about this rendition is that I somehow managed to cut two of the same piece... I put back in the photo above, but looking at it now in comparison to the aqua one, I think maybe I cut two fronts? (It was really hard to tell because I also messed up in cutting the neckline a bit... sigh.) Anyway, I didn't have enough fabric to cut a new back. While it definitely doesn't fit quite right, it actually is in fact wearable. Phew! The fabric is another ITY knit from Fabric Mart.
All of these pieces are now in regular rotation in my wardrobe. Tried and true!
I started with another rendition of Kwik Sew 3513:
Here I've got the top tucked in so you can see the foldover waistband.
I loved this the first time I sewed it up, and my love remains constant. It is a simple, straightforward, and effective design! I again made a size Medium. My only change was to add 5" to the length in order to make it into more of a maxi-skirt. The fabric is a Maggy London ITY knit from Fabric Mart.
The aqua top that I'm wearing with the skirt is another remake of the Maria Denmark Kirsten Kimono Tee. This is the third one I've made (version one | version two). This time I used a poly/lycra jersey knit in a pretty Caribbean blue from Fabric Mart. This is the Large with a 1" dartless FBA (Maria Denmark offers a friendly tutorial for no-dark fronts). Such a fabulous design made even more so because Maria Denmark offers it as a FREE pattern when you sign up for her newsletter.
And here is another Kirsten Kimono Tee:
So the only remarkable thing about this rendition is that I somehow managed to cut two of the same piece... I put back in the photo above, but looking at it now in comparison to the aqua one, I think maybe I cut two fronts? (It was really hard to tell because I also messed up in cutting the neckline a bit... sigh.) Anyway, I didn't have enough fabric to cut a new back. While it definitely doesn't fit quite right, it actually is in fact wearable. Phew! The fabric is another ITY knit from Fabric Mart.
All of these pieces are now in regular rotation in my wardrobe. Tried and true!